Manta100 Square Feet of Shelter You read that right: 100 square feet of canvas hides inside a thick black cover, ready to deploy a generous amount of shade or shelter in a moment’s notice. These are my impressions after four years of enjoying the Manta’s shade from the blazing desert sun, sheltering from storms underneath it, and putting it through tortures that have ripped lesser awnings to pieces. The Basics When fully deployed, the Manta’s shape provides a larger than 7-by-7-foot rectangle of coverage off the side of a vehicle or trailer, which wraps around the rear with an additional 14-by-7-foot triangle. When it’s time to hit the road, the entire mass of sturdy 260-gram waterproof ripstop canvas rolls up into a UV-resistant PVC cover that’s no bigger than an awning half the Manta’s size. The Manta’s chassis is made entirely of lightweight anodized aluminum. Adjustable legs with integrated stake holes recess inside C-channel rafter arms, which pivot away from a stout length of aluminum extrusion on stainless steel hinge bolts. All of this combines to create a structure that is sturdy, lightweight, and highly corrosion resistant, and easily repaired with basic hand tools and commonly available hardware. That’s not to say the awning is easy to damage—quite the contrary as you’ll read below—but I take comfort knowing that if the Manta gets damaged all of it’s components (including the canvas panels) are field-replaceable. The awning can be mounted to most roof racks or even load bars, thanks to standard 8mm hardware that can be placed nearly anywhere along the Manta’s 90-inch frame. Of course, if you’re running an Eezi-Awn K9 roof rack there is a convenient kit available to match. The legs are adjustable in height up to 92 inches, so it sits nicely on even the tallest adventure mobiles. Setup or Teardown in Seconds (yes, really) That’s not just marketing hype. The first time I set up a Manta I skipped the directions and took just under two minutes. Today I could do it in 30 seconds, or under two minutes with stakes at all four legs. Teardown—which is the messiest and most time-consuming task with most awnings—is just as easy. Better still, you can pack the Manta away without getting the canvas all up in your face. If you’ve ever covered yourself in the previous night’s dust and campfire ashes you know just how important that is. Of all the awning systems I’ve…
Swing-outWrapping up the Bumper Project At long last: here’s the details on Ulysses’ rear swing-out. This swing-out carries a full-size 285/65R18 (33×11.50) spare, Hi-Lift Jack, small Eezi-Awn K9 Table, 42-liter Alubox to store water/propane hoses and the water heater, and a 10# propane tank to fuel the stove, water heater, and fire pit. License plate lighting is provided from a set of LED bolt lights. The framework is made almost entirely from upcycled steel salvaged from a friend’s old teardrop frame, and it all rides on an A-to-Z Fab Mega-Duty Hinge. Building the swing-out atop the already squared and straight bumper was a much simpler feat than building the bumper, so on to the fabrication photos……